Oktober 2013

Archive for Oktober 2013

AMPHAROS

Senin, 14 Oktober 2013

Posted by K

Add Comments

AMPHAROS

181 / AMPHAROS - Pokémon Papercraft
Name: Ampharos
Type: Electric
Species: Light Pokémon
Height: 1.4m (4' 7")
Weight: 61.5 kg (135.6 lbs)
Interesting Facts: Ampharos gives off so much light that it can be seen even from space. People in the old days used the light of this Pokémon to send signals back and forth with others far away. It evolves from Flaaffy starting at level 30. It is the final form of Mareep.

THE PAPER MODEL
Height: 16.0 cm
Width: 13.4 cm
Depth: 9.6 cm
No. of Pages: 4
Level: Medium

NOTES: Ampharos' head, orbs and the soles of its feet may be built without folds. And a tip if the feet aren't perfectly aligned and Ampharos cannot stand perfectly, Lyrin suggests that you may tie a string around the ankles, and pull 'till the soles lay flat on the table. Leave Ampharos like this at least for a night. This way the legs will gently bend and Ampharos will stand.

Download: A4 / Letter

PIKACHU

Posted by K

Add Comments

PIKACHU

025 / PIKACHU - Pokémon Papercraft
Name: Pikachu
Type: Electric
Species: Mouse
Generation: One
Height: 0.4m (1′04″)
Weight: 6.0kg(13.2 lbs.)
Interesting Facts: Pikachu are known to have acute senses of hearing, thanks to their large ears. Most domestic Pikachu are very intelligent, understanding and interpreting human speech at levels far surpassing those of any pet dog. A female Pikachu has a small "dent" at the end of its tail, causing it to resemble a heart. It evolves from Pichu by the measure of it's happiness, and evolves into Raichu using a Thunderstone. There's also two Pokédolls based on Pikachu; Normal and Surfin'.

THE PAPER MODEL
Height: 16.5 cm /6.49 in
Width: 9.6 cm /3.78 in
Depth: 18.5 cm /7.28 in
No. of Pages: 4
Level: Medium

NOTES: Special thanks go to POdragon for her help with some of the 3D editing. Before closing the model, glue a penny onto the inside of tummy, as a counter balance for the huge tail! Observe the coloured tabs on the fingers - it'll make building (away from the .PDO) much easier. The apple is also included in the download pack.

Download: A4/ Letter

RAICHU

Posted by K

Add Comments

RAICHU

026 / RAICHU - Pokémon Papercraft
Name: Raichu
Type: Electric
Species: Mouse Pokémon
Height: 0.63 m (2'07")
Weight: 29.98 kg (66.1 lbs.)
Interesting Facts: Although Raichu is quite small, it is capable of storing over 100,000 volts of electricity in its body. Raichu is much more aggressive than Pikachu, especially if it has stored too much electricity in its body. It needs to constantly discharge this electricity through its tail into the ground, and will electrocute objects, people, and Pokémon until its electricity level is back to normal.

THE PAPER MODEL
Height: 25.0 cm/9.84 in
Width: 19.4 cm/ 7.64 in
Depth: 17.6 cm/6.93 in
No. of Pages: 7
No. of Pieces: 56
Level: Hard

NOTES: The ears and tail are the tricky parts of this model. The ear curl must be glued together and cut out before the ear is constructed. The tail should be made and attached before the main body is closed up. Start at the base of the tail, and build each section before inserting it, with a generous amount of glue, into the previous part. Remember to wait for that section to cure (dry) completely before moving on to the next piece. And as a bonus, we are also including a surprise :o version of Raichu in this pack!

Download: A4 / Letter

JOLTEON

Posted by K

Add Comments

JOLTEON

135 / JOLTEON - Pokémon Papercraft
Name: Jolteon
Type: Electric
Species: Lightning Pokémon
Height: 0.8 m (8′08″)
Weight: 24.5 kg (54.0 lbs.)
Interesting Facts: Jolteon's cells generate a low level of electricity. This power is amplified by the static electricity of its fur, enabling the Pokémon to drop thunderbolts. The bristling fur is made of electrically charged needles. Jolteon is the only Eevee evolution without a tail. Oddly, it can still learn Tail Whip and Iron Tail. It evolves from Eevee via Thunderstone.

THE PAPER MODEL
Height: 18 cm/7 in
Width: 18.9 cm /7.4 in
Depth: 13.3 cm/5.2 in
No. of Pages: 7
No. of Pieces: 74
Level: Hard

NOTES: Follow the numbers on the pieces for the recommended build order. The spikes can become confusing so try to pay close attention to the correct order and use the PDO as guide as much as possible.

Download: A4 / Letter

SHINX

Posted by K

Add Comments

SHINX

403 / SHINX - Pokémon Papercraft
Name: Shinx
Type: Electric
Species: Flash Pokémon
Height: 0.3 m (1'08")
Weight: 9.5 kg (20.9 lbs.)
Interesting Facts: Shinx evolves into Luxio starting at level 15, who then evolves into Luxray starting at level 30. Around its forelegs there are a couple of gold ring. These are electricity glands, similar in prurpose as Pikachu's cheeks. When Shinx senses danger, its fur begins to "dazzle", mementarily blinding its foe as it flees.

THE PAPER MODEL
Height: 15.0 cm/5.9 in
Width: 14.7 cm/ 5.8 in
Depth: 17.9 cm/7.0 in
No. of Pages: 4
No. of Pieces: 51
Level: Easy

NOTES: A straight forward build - start at the head and close at one of the hind feet. The only fiddly part is the bottom tufts, and it is advisable that you refer to the PDO for that part.

Download: A4 / Letter

MINUN

Posted by K

Add Comments

MINUN

312 / MINUN - Pokémon Papercraft
Name: Minun
Type: Electric
Species: Cheering Pokémon
Height: 0.32 m (1'04")
Weight: 4.2 kg (9.3 lbs.)
Interesting Facts: Minun creates electrical pom-poms from its forepaws and sparks from its body to cheer on its partners. Minun cares more for its teammates than for itself, sending off showers of sparks while cheering them on. At a meeting of Pokémon academics, it was announced that simultaneous exposure to electricity from a Plusle and Minun will promote circulation and boost vitality. If its partner is in trouble, this Pokémon gives off increasing amounts of sparks. Minun's stats are geared towards defense whereas Plusle's stats are sweeper-oriented. It is not known to evolve into or from any other Pokémon.

THE PAPER MODEL
Height: 18.0 cm/7.1 in
Width: 16.6 cm/ 6.5 in
Depth: 8.9 cm/3.5 in
No. of Pages: 4
No. of Pieces: 33
Level: Medium

NOTES: Build by numbers. Pull the long strips of the head across the edge of a table to curl the paper - creating a smoother shape. Close model at one of the feet. Before you use super glue to attach the tail to the body, stand the model up and position the tail so that it acts like a stabilizer.

Download: A4 / Letter

PLUSLE

Posted by K

Add Comments

PLUSLE

311 / PLUSLE - Pokémon Papercraft
Name: Plusle
Type: Electric
Species: Cheering Pokémon
Height: 0.32 m (1'04")
Weight: 4.2 kg (9.3 lbs.)
Interesting Facts: Plusle and Minun bear a remarkable resemblance to their "cousins" Pichu and Pikachu. Plusle creates electrical pom-poms from its forepaws and sparks from its body to cheer on its partners. Plusle is a cheerful and supportive Pokémon, always encouraging comrades in battle by using the spark pouches in its cheeks, it shorts out its body to create the crackling noises of sparks to show its joy. It is very compassionate towards its friends, and is known to cry upon witnessing a friend lose a battle. They are commonly referred to as cheerleaders for these actions. A Plusle may climb telephone poles to absorb electricity. It is not known to evolve into or from any other Pokémon.

THE PAPER MODEL
Height: 18.0 cm/7.1 in
Width: 16.6 cm/ 6.5 in
Depth: 8.9 cm/3.5 in
No. of Pages: 4
No. of Pieces: 33
Level: Medium

NOTES: Build by numbers. Pull the long strips of the head across the edge of a table to curl the paper - creating a smoother shape. Close model at one of the feet. Before you use super glue to attach the tail to the body, stand the model up and position the tail so that it acts like a stabilizer.

Download: A4 / Letter

PIKACHU-COLORED and SPIKY-EARED PICHU

Posted by K

Add Comments

PIKACHU-COLORED and SPIKY-EARED PICHU

172 / SPIKY-EARED PICHU - Pokémon Papercraft
Name: Pichu
Type: Electric
Species: Tiny Mouse Pokémon
Height: 0.3 m (1′00″)
Weight: 2.0 kg (4.0 lbs.)
Interesting Facts: Spiky-eared Pichu (also known as Notched-ear Pichu) is obtainable in HeartGold/SoulSilver only if you go to the Ilex Forest Shrine whith the special Pikachu-colored Pichu in your team. It'll jump from behind the shrine and join you at level 30, female, with the moves Volt Tackle, Helping Hand, Swagger and Pain Split. If taken to Professor Elm, it is revealed that she has travelled through time with Celebi. He adds that the reason it cannot evolve is because she has been time travelling for so long. He will then call all the Pokémon Center attendants to prevent Spiky-Eared Pichu from being used in trades.

THE PAPER MODEL
Height: 15 cm/5.9 in
Width: 18,7 cm/ 7.4 in
Depth: 11 cm/4.3 in
No. of Pages: 3
No. of Pieces: 27
Level: Medium

NOTES: The model isn't difficult to build overall. The only challenging parts are the arms and the tiny thumbs. I suggest you to use tweezers for holding the thumbs tabs while they glue. As usual, follow the numbers on the template, and use the .pdo as reference (recommended). The ear-spike is optional: you'll have to build the left ear first, then assemble the spike, fold its tabs inside it, and then glue it on top of the ear. I've included shiny textures even if Spiky-eared Pichu hasn't a shiny version ingame. I did so in case someone wanted to build a simple shiny Pichu (leaving out the ear-spike).

Download: A4 / Letter

172 / Pikachu-colored Pichu - Pokémon Papercraft
Name: Pichu
Type: Electric
Species: Tiny Mouse Pokémon
Height: 0.3 m (1′00″)
Weight: 2.0 kg (4.0 lbs.)
Interesting Facts: Pikachu-colored Pichu is a shiny Pichu that has been given to players who pre-ordered tickets for the 12th Pokémon movie in Japan. It is a male in a Cherish Ball, it's at level 30 while holding an Everstone and a Classic Ribbon. It also knows the moves Charge, Volt Tackle, Endure and Endeavor. In North America it was available for download in GameStop from January 30th to February 14th (D/P/Pt). It is now available to download via wi-fi connection in Europe, America, and Australia (until 26th March). If you go to the Ilex Forest Shrine with him in your party (HeartGold/SoulSilver), you'll be able to get a special Pichu.

THE PAPER MODEL
Height: 14.4 cm/5.6 in
Width: 17.7 cm/ 6.9 in
Depth: 10.8 cm/4.2 in
No. of Pages: 3
No. of Pieces: 26
Level: Medium

NOTES: The model isn't difficult to build overall. The only challenging parts are the arms and the tiny thumbs. I suggest you to use tweezers for holding the thumbs tabs while they glue. As usual, follow the numbers on the template, and use the .pdo as reference (recommended). A "normal color" texture is included too: I did so in case someone wanted to build a normal Pichu.

Download: A4 / Letter

BLITZLE

Posted by K

Add Comments

BLITZLE

522 / BLITZLE - Pokémon Papercraft
Name: Blitzle (Shimama)
Type: Electric
Species: Electrification Pokémon
Height: 0.8 m (2′08″)
Weight: 29.8 kg (66.2 lbs.)
Interesting Facts: Shimama is a corruption of the Japanese word シマウマ shimauma, meaning "zebra."

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 12.1 cm/ 4.7 in
Depth: 4.3 cm/ 1.6 in
Pages: 3
Pieces: 42
Level: Easy/Medium

NOTES: Shiny now included in the download packs.

Download: A4 / Letter

FLAAFFY

Posted by K

Add Comments

FLAAFFY

180 / FLAAFFY - Pokémon Papercraft
Name: Flaaffy
Type: Electric
Species: Wool Pokémon
Height: 0.8 m (2′07″)
Weight: 13.3 kg (29.3 lbs.)
Interesting Facts: Flaaffy's wool is similar to Mareep's in that it stores electricity; however, Flaaffy's wool is much more efficient, so that it can store more electricity than Mareep despite having less wool on its body. They also have rubbery skin to prevent themselves from being electrocuted. Unlike Mareep, Flaaffy are able to stand on their hind legs and are able to use their forelimbs to maniuplate things or deliver blows. It evolves from Mareep starting at level 15, and evolves into Ampharos starting at level 30.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 11.8 cm/ 4.7 in
Depth: 17.6 cm/ 6.8 in
Pages: 5
Pieces: 46
Level: Medium

NOTES: You should start building this model from the head to the feet and tail. Start by the face and ears, and then connect them by building the hair around them from top to the shoulder. Glue the arms in and then do the body. Glue the legs, feet and finish with the tail. Lastly, just make the ball at the tip of the tail and glue it on.

Download: A4 / Letter

RAIKOU

Posted by K

Add Comments

RAIKOU

243 / RAIKOU - Pokémon Papercraft
Name: Raikou
Type: Electric
Species: Thunder Pokémon
Height: 1.9 m (6′03″)
Weight: 178.0 kg (392.4 lbs.)
Interesting Facts: It is, along with Entei and Suicune, one of the legendary beasts created by Ho-Oh after the burning of the Brass Tower. Of the three legendary beasts, Raikou is said to represent the lightning strike which ignited the burning Brass Tower. It is not known to evolve into or from any other Pokémon.

THE PAPER MODEL
Height: 18.5 cm/7.3 in
Width: 13.1 cm/ 5.2 in
Depth: 35.7 cm/14.1 in
Pages: 7
Pieces: 76
Level: Medium/Hard

NOTES: Build from head to back, closing at the bottom of the feet. Be sure to add the 'thunderclouds' before advancing too far, as you'll need internal pressure for them to set right. When making the tail, you have the option to build it either 2D or 3D. Both ends just glue onto the main piece.

Download: A4 / Letter

PIKACHU V2

Posted by K

Add Comments

PIKACHU V2

025 / PIKACHU - Pokémon Papercraft
Name: Pikachu
Type: Electric
Species: Mouse Pokémon
Height: 0.4 m (1'04")
Weight: 6.0 kg (13.2 lbs.)
Interesting Facts: A Pikachu is a short, chubby, ground-dwelling rodent notable for its Electric abilities. Pikachu have short, yellow fur with brown stripes on the back, red cheeks that can produce small jolts of electricity, a mouth that looks like a sideways three, black-tipped ears, along with an unusually shaped tail, resembling a lightning bolt. Besides its evolution and pre-evolution, it may be related to Plusle, Minun, Pachirisu, and Emonga due to notable physical similarities. Pikachu are known to have acute senses of hearing, thanks to their large ears. Most domestic Pikachu are able to understand and interpret human speech at levels far surpassing those of any pet dog.

THE PAPER MODEL
Height: 18.1 cm/7.1 in
Width: 15.2 cm/ 5.9 in
Depth: 16.1 cm/6.3 in
Pages: 5 (pikachu) + 1 (scarf)
Pieces: 43 (male)/45 (female) + 1 (scarf)
Level: Medium

NOTES: The model isn't difficult, the only tricky parts are the fingers. First thing, start with the thumb and create the five pyramids that compose the fingers. Once you've done it, making the rest of the hand will be really simple. Anyway, refer to the pdo for building them: it'll be even simpler (I've also coloured the finger-parts that need to be glued together with the same colour). As for the rest, follow the numbers on the template and you'll be fine. Once you reach the tail, choose if you want a female or a male Pikachu, and only print the corresponding page. And if you want to build the scarf, there's a close-up picture in the download pack that shows how the knot is done (and also the fingers, so you can use that picture for further reference). Please note that you can use normal printer paper to print out the scarf (it'll be simpler to wrap around pika's neck, in fact), and that there's no need to glue it: it's completely unwrappable and removable. There are also a blue and a red scarf texture in the pack, in case you want to customize your Pikachu (you'll have to change the texture settings in pepakura viewer to use them).

Download: A4 / Letter

PACHIRISU

Posted by K

Add Comments

PACHIRISU

417 / PACHIRISU - Pokémon Papercraft
Name: Pachirisu
Type: Electric
Species: EleSquirrel Pokémon
Height: 0.4 m (1′04″)
Weight: 3.9 kg (8.6 lbs.)
Interesting Facts: Pachirisu are active Pokémon, generally being hyper active during the day. When they sleep, Pachirisu like to curl their big, fluffy tails round to the front of their bodies and use them as a pillow. They also like to chase and groom their tails. When a Pachirisu sheds its fur it shapes them into furballs. Because its fur has static in it, the furballs do too. A pair of Pachirisu may rub their cheek pouches together to share stored electricity. It is not known to evolve into or from any other Pokémon.

THE PAPER MODEL
Height: 29.5 cm/ 12.0 in
Width: 13.0 cm/ 5.11 in
Depth: 28.9 cm/ 11.4 in
Pages: 11
Pieces: 68
Level: Medium/Hard

NOTES: The whole model is made of multiple part. The head and body are attached together, but the arms and feet are built separately and glued on the body afterward. The tail is also one big piece.

So just build the head and body and then glue the arms to the body, then the tail. Finally you glue the feet below the body to balance it, it should works like a tripod, with the 2 feet and the tail balancing the model.

Download: A4 / Letter

MAGNEZONE

Posted by K

Add Comments

MAGNEZONE

462 / MAGNEZONE - Pokémon Papercraft
Name: Magnezone
Type: Steel / Electric
Species: Magnet Area Pokémon
Height: 1.2 m (3′11″)
Weight: 180.0 kg (396.8 lbs.)
Interesting Facts: Magnezone and its evolutionary line have twelve resistances and one immunity, making them the most resistant Pokémon to date. With the addition of Magnet Rise, which makes them immune to Ground-type attacks for a short period of time, their only double weakness is negated. If frightened, Magnezone will discharge electricity uncontrollably. It evolves from Magneton via level-up in Mt. Coronet. It is the final form of Magnemite.

THE PAPER MODEL
Height: 16.5 cm / 6.5 in
Width: 22.8 cm / 9.0 in
Depth: 24.9 cm / 9.8 in
Pages: 7
Pieces: 53
Level: Medium/Hard

NOTES: Build from the top down, following the numbers. Be sure to attach the magnets to the side before attaching the band that wraps around them. Other than that it's a pretty linear build.

Download: A4 / Letter

MAGNEMITE & MAGNETON

Posted by K

Add Comments

MAGNEMITE & MAGNETON

081-082 / MAGNEMITE & MAGNETON - Pokémon Papercraft
Name: Magnemite & Magneton
Type: Electric/Steel
Species: Magnet Pokémon
Height: 0.3-1.0 m (1′0″-3'03")
Weight: 6.0 - 60.0 kg (13.2 - 132.3 lbs.)
Interesting Facts: The magnetic units on Magnemite's body create electromagnetic waves that allow it to defy gravity and that can potentially disrupt various electrical equipment. The faster the units at its sides rotate, the greater the magnetic force they generate. However, it becomes incapable of flight if its internal electrical supply is depleted. Magnemite usually attack by using electrical attacks such as Thunder Wave and Zap Cannon. Magnemite can also focus magnetic energy into a homing-attack known as Magnet Bomb.

THE PAPER MODEL
Height: 10.1 cm / 4.0 in
Width: 19.9 cm / 7.8 in
Depth: 8.0 cm / 3.1 in
Pages: 3 (9)
Pieces: 19 (57)
Level: Easy

NOTES: Pretty straightforward one. Build from the top down, attaching screw along the way. Magnets can attach either at the end or just before closing. If you want Magneton, just build three and attach them.
It may be useful to reference some of the art across the games, since Magneton's design varies slightly per each game.

Download: A4 / Letter

CHINCHOU

Posted by K

Add Comments

CHINCHOU

170 / CHINCHOU - Pokémon Papercraft
Name: Chinchou (Chonchii)
Type: Water / Electric
Species: Angler Pokémon
Height: 0.5 m (1′08″)
Weight: 12.0 kg (26.5 lbs.)
Interesting Facts: Chinchou flashes its electric lights to exchange signals with others. The electricity-generating cells in Chinchou’s antennae create so much electrical power, it even makes itself tingle slightly. Chinchou tend to lurk in the dark ocean floors, rarely ever coming up to the surface or near it. It evolves into Lanturn starting at level 27.

THE PAPER MODEL
Height: 14.9 cm / 5.9 in
Width: 21.2 cm / 8.4 in
Depth: 23.7 cm / 9.2 in
Pages: 5
Pieces: 38
Level: Easy/Medium

NOTES: You should be alright if you follow the instructions on the template. Just keep in mind to cut and glue the wings before completing the body.

Download: A4 / Letter

ELECTRODE

Posted by K

Add Comments

ELECTRODE

101 / ELECTRODE - Pokémon Papercraft
Name: Electrode
Type: Electric
Species: Ball Pokémon
Height: 1.2 m (3' 11")
Weight: 66.6 kg (146.8 lbs)
Interesting Facts: Electrode tend to live in power plants where fresh electricity is being generated. As a result, this Pokémon often causes blackouts. Electrode explodes in response to even the smallest stimuli. It is known to explode when bored just to entertain itself. Known as Bomball. It evolves from Voltorb starting at level 30.

THE PAPER MODEL
Height: 14.0 cm/ 5.5 in
Width: 14.3 cm/ 5.6 in
Depth: 14.0 cm/ 5.5 in
No. of Pages: 4
Level: Easy

NOTES: This craft is in scale with Voltorb. Also, there are two sets of eyebrows included; 2D and 3D. Build either set according to preference.

Download: A4 / Letter

VOLTORB

Posted by K

Add Comments

VOLTORB

100 / VOLTORB - Pokémon Papercraft
Name: Voltorb
Type: Electric
Species: Ball Pokémon
Height: 0.5 m (1' 08")
Weight: 10.4 kg (22.9 lbs)
Interesting Facts: Voltorb is a Pokémon that looks like a Poké Ball with a face, minus the button. Its top half is red, and its bottom half is white. It was first seen in the plant that modern Poké Balls were invented. It evolves into Electrode starting at level 30.

THE PAPER MODEL
Height: 6.0 cm/ 2.5 in
Width: 6.3 cm/ 2.5 in
Depth: 5.9 cm/ 2.3 in
No. of Pages: 1
Level: Easy

NOTES: This craft is in scale with Electrode, which means it is a bit small (but still fairly easy). Follow the numbers, and close at the bottom.

Download: A4 / Letter

LUXRAY

Posted by K

Add Comments

LUXRAY

405 / LUXRAY - Pokémon Papercraft

Name: Luxray
Type: Electric
Species: Gleam Eyes Pokémon
Height: 1.4 m (4′07″)
Weight: 42.0 kg (92.6 lbs.)
Interesting Facts: Luxray are extremely vicious and predatorial, although when tamed and trained correctly they can become very loyal and faithful, protecting their Trainer from danger. They tend to be stubborn and can administer extreme amounts of power through their electricity. Because of their flawless x-ray like vision, practically nothing can go unseen by their eyes. Abusing a Luxray can cause it to become antagonistic and vengeful towards their Trainer. Luxray need a lot of compassion and praise to maintain their satisfaction, as they are proud creatures. While generally independent, Luxray may band together in large groups and look out for one another in the wild.

THE PAPER MODEL
Height: 19.8 cm/ 7.8 in
Width: 10.5 cm/ 4.1 in
Depth: 18.7 cm/ 7.4 in
Pages: 5
Pieces: 79
Level: Hard

NOTES: Follow the numbers while building, and refer to the included Edge ID pdf if needed to be sure of how tabs line up. Definitely refer to the pdo if possible, as the spikes get a bit confusing. Attach the tail and spikes before the rear legs, and close at the bottom of the feet.

Download: A4 / Letter

MAREEP

Posted by K

Add Comments

MAREEP

179 / MAREEP - Pokémon Papercraft
Name: Mareep
Type: Electric
Species: Wool Pokémon
Height: 0.6 m (2′00″)
Weight: 7.8 kg (17.2 lbs.)
Interesting Facts: Mareep is Pokémon which is based on a sheep. It has cream, messy wool covering its entire body, as well as curly tuft of wool in the middle of its head. Its head is blue, and it has black eyes with white pupils. Its feet are blue and have two digits on each foot, which also appears to always be on tip-toe. Its horns, presumed to be its ears, and tail have a yellow and black striped pattern. Mareep has an orange sphere at the end of its tail which acts a small lightbulb.

THE PAPER MODEL
Height: 10.0 cm/ 3.9 in
Width: 7.9 cm/ 3.1 in
Depth: 16.3 cm/ 6.4 in
Pages: 3
Pieces: 40
Level: Easy/Medium

NOTES: Build from the head backwards, closing near the bottom of the tail. Attach the legs at the end.

Download: A4 / Letter

MANECTRIC

Posted by K

Add Comments

MANECTRIC

310 / MANECTRIC - Pokémon Papercraft

Name: Manectric
Type: Electric
Species: Discharge Pokémon
Height: 1.5 m (4′11″)
Weight: 40.2 kg (88.6 lbs.)
Interesting Facts: Manectric largely resembles a dog or wolf. It is blue in color and has a yellow mane on its head , as well as large yellow tufts of fur on its haunches and around its front feet.

THE PAPER MODEL
Height: 15.2 cm/ 6.0 in
Width: 15.0 cm/ 5.9 in
Depth: 18.0 cm/ 7.1 in
Pages: 4
Pieces: 67
Level: Medium

NOTES: Notes and build instructions are included in the packs. Build from the head back, attaching legs and spikes as you go. Close at the tail.

Download: A4 / Letter

EMOLGA

Posted by K

Add Comments

EMOLGA

587 / EMOLGA - Pokémon Papercraft
Name: Emolga
Type: Electric/Flying
Species: Sky Squirrel Pokémon
Height: 0.4 m (1′04″)
Weight: 5.0 kg (11. lbs.)
Interesting Facts: Emolga is a rodent-like Pokémon, primarily white in coloration, that most resembles a flying squirrel. It possesses facial features similar to Pachirisu's, such as its eyes, tiny nose, and yellow cheek patches. Its ears, positioned at the top of its head, are rounded in shape and black in coloration, with yellow and white sections of coloration in the inside of its ears. Emolga sports a vaguely hood-like patterning of black around its head, with a spiky extension of the pattern above its face. Emolga possesses winglike, yellow-colored flaps connected to its three-fingered arms. Its feet are white-colored and fairly small and its black-colored tail is in a jagged shape.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 13.8 cm/ 5.4 in
Depth: 13.4 cm/ 5.3 in
Pages: 4
Pieces: 48
Level: Medium

NOTES: Notes included. Follow the numbers, but be sure to build and set aside the tail/back combination before attaching. Be careful with the tail and feet, they're the trickiest parts. And as always, be sure to 'pre-curl' the round parts of the head and body. To do so, simply use a colored pencil or x-acto knife handle, place the piece face down in your palm, and rub it into a circle with the tool.
No need to glue the base, simply place it under the tail.

Download: A4 / Letter

JOLTEON CHIBI

Posted by K

Add Comments

JOLTEON CHIBI

35 / JOLTEON CHIBI - Pokémon Papercraft
Name: Jolteon
Type: Electric
Species: Lightning Pokémon
Height: 0.8 m (8′08″)
Weight: 24.5 kg (54.0 lbs.)
Interesting Facts: Jolteon's cells generate a low level of electricity. This power is amplified by the static electricity of its fur, enabling the Pokémon to drop thunderbolts. The bristling fur is made of electrically charged needles. Jolteon is the only Eevee evolution without a tail. Oddly, it can still learn Tail Whip and Iron Tail. It evolves from Eevee via Thunderstone.

THE PAPER MODEL
Height: 7.5 cm/3 in
Width: 6.2 cm /2.4 in
Depth: 6.1 cm/2.4 in
No. of Pages: 1
No. of Pieces: 20
Level: Medium

NOTES: Follow the numbers on the template while building. The only pieces that need to be folded are the neck white spikes. Start with the head and close it at the bottom. Build the legs and then go upwards, till you close the body at the "neck". Build the neck fur, then put it in its place and glue the head onto the body, then glue the ears. Glue the remaining yellow fur on the face and butt.

Download: A4 / Letter

ZEKROM

Posted by K

Add Comments

ZEKROM

644 / ZEKROM - Pokémon Papercraft

Name: Zekrom
Type: Dragon/Electric
Species: Deep Black Pokémon
Height: 2.9 m (9′06″)
Weight: 345.0 kg (760.6 lbs.)
Interesting Facts: Zekrom is a bipedal Pokémon of dragon- and dinosaur-like basis. Zekrom is mainly a shade of dark gray, with darker patches on various portions of its body. It has red eyes (although in some scenes its eyes are depicted as having white irises and red sclera) and a small horn-like protrusion on the tip of its snout, with its head sporting a plume tipped with light-blue coloration. At the base of its neck is a black, stud-like feature, and atop its shoulders are similar, larger features resembling armor padding. The bases of its wings also have such padding, and a fanned, splayed, seemingly webbed shape with a small "wing-spike" on one edge. The lower length of Zekrom's arms extenuate into splayed, seemingly webbed, somewhat baseball-mitt-like formations, with three-clawed, dark-colored hands on the undersides. The front portion of Zekrom's waist is black-colored, with its belly and thighs having thin striations down their length. Its knees are black, as are the foremost parts of its three-clawed feet and spiked heels. Zekrom's tail consists of large, round, conical and spiked formation, likened to an electricity generator, with a black inner portion and bands on the tip of the outside portion.

THE PAPER MODEL
Height: 28.6 cm/ 11.3 in
Width: 27.2 cm/ 10.7 in
Depth: 35.7 cm/ 14.1 in
Pages: 11
Pieces: 145
Level: Hard

NOTES: Build from the head down. Be careful with the wings, shoulders, and hands, attaching limbs as you go. Attach the legs before moving to the tail, and close at the tip of the tail. Base included, as model is quite tail heavy. This is a difficult model, do not attempt without considerable experience.

Download: A4 / Letter

ZAPDOS

Posted by K

Add Comments

ZAPDOS

145 / Zapdos - Pokémon Papercraft
Name: Zapdos
Type: Electric/Flying
Species: Electric Pokémon
Height: 1.6 m (5'03")
Weight: 52.6 kg (116.0 lbs)
Interesting Facts: When Zapdos flaps its glittering wings, it releases electricity that can potentially cause thunderstorms. It causes cause massive crackling and snapping sounds when it flies; these are attributed to the lightning bolts sheds when airborne. When stricken by lightning, it gains power. Zapdos reportedly appears only during thunderstorms, and is said to live among thunderclouds. However, it is rarely seen.

THE PAPER MODEL
Height: 25.9 cm/ 10.2 in
Width: 27.8 cm/ 10.9 in
Depth: 15.4 cm/ 6.1 in
No. of Pages: 8
Level: Medium/Hard

NOTES: First off- be sure to fold all the sharp folds! This includes the wings, beak, legs and 'head spikes' in particular.
Start with the halo of spikes around the face, and work inward towards the beak. Be very careful with the beak in particular, it's very small and easy to mess up. Then start to work down the back of the head, and attach the first set of Yellow Wings as soon as possible. Keep working down the body, and attach the second set of back, Black Wings once the body can support them. Same goes with the feet- be sure to attach the yellow 'leg caps' before attaching the feet+brown fur overtop of the caps. Close at the bottom with the 'skirt', being sure to attach the main yellow piece, then the inverted yellow piece to match it inside, and repeat with the black pieces.
Two different 'bolt' patterns included for the base. Feel free to mix and match textures for the base in the pdo! Stony textures also work especially well.
Edge ID files also included for reference.

Download: A4 / Letter

Popular posts

About

Archive for Oktober 2013

AMPHAROS

PIKACHU

RAICHU

JOLTEON

SHINX

MINUN

PLUSLE

PIKACHU-COLORED and SPIKY-EARED PICHU

BLITZLE

FLAAFFY

RAIKOU

PIKACHU V2

PACHIRISU

MAGNEZONE

MAGNEMITE & MAGNETON

CHINCHOU

ELECTRODE

VOLTORB

LUXRAY

MAREEP

MANECTRIC

EMOLGA

JOLTEON CHIBI

ZEKROM

ZAPDOS

Blogger templates

Blogger news

Blogroll

Blog Archive

Mengenai Saya