Electric

AMPHAROS

181 / AMPHAROS - Pokémon Papercraft
Name: Ampharos
Type: Electric
Species: Light Pokémon
Height: 1.4m (4' 7")
Weight: 61.5 kg (135.6 lbs)
Interesting Facts: Ampharos gives off so much light that it can be seen even from space. People in the old days used the light of this Pokémon to send signals back and forth with others far away. It evolves from Flaaffy starting at level 30. It is the final form of Mareep.

THE PAPER MODEL
Height: 16.0 cm
Width: 13.4 cm
Depth: 9.6 cm
No. of Pages: 4
Level: Medium

NOTES: Ampharos' head, orbs and the soles of its feet may be built without folds. And a tip if the feet aren't perfectly aligned and Ampharos cannot stand perfectly, Lyrin suggests that you may tie a string around the ankles, and pull 'till the soles lay flat on the table. Leave Ampharos like this at least for a night. This way the legs will gently bend and Ampharos will stand.

Download: A4 / Letter

PIKACHU

025 / PIKACHU - Pokémon Papercraft
Name: Pikachu
Type: Electric
Species: Mouse
Generation: One
Height: 0.4m (1′04″)
Weight: 6.0kg(13.2 lbs.)
Interesting Facts: Pikachu are known to have acute senses of hearing, thanks to their large ears. Most domestic Pikachu are very intelligent, understanding and interpreting human speech at levels far surpassing those of any pet dog. A female Pikachu has a small "dent" at the end of its tail, causing it to resemble a heart. It evolves from Pichu by the measure of it's happiness, and evolves into Raichu using a Thunderstone. There's also two Pokédolls based on Pikachu; Normal and Surfin'.

THE PAPER MODEL
Height: 16.5 cm /6.49 in
Width: 9.6 cm /3.78 in
Depth: 18.5 cm /7.28 in
No. of Pages: 4
Level: Medium

NOTES: Special thanks go to POdragon for her help with some of the 3D editing. Before closing the model, glue a penny onto the inside of tummy, as a counter balance for the huge tail! Observe the coloured tabs on the fingers - it'll make building (away from the .PDO) much easier. The apple is also included in the download pack.

Download: A4/ Letter

RAICHU

026 / RAICHU - Pokémon Papercraft
Name: Raichu
Type: Electric
Species: Mouse Pokémon
Height: 0.63 m (2'07")
Weight: 29.98 kg (66.1 lbs.)
Interesting Facts: Although Raichu is quite small, it is capable of storing over 100,000 volts of electricity in its body. Raichu is much more aggressive than Pikachu, especially if it has stored too much electricity in its body. It needs to constantly discharge this electricity through its tail into the ground, and will electrocute objects, people, and Pokémon until its electricity level is back to normal.

THE PAPER MODEL
Height: 25.0 cm/9.84 in
Width: 19.4 cm/ 7.64 in
Depth: 17.6 cm/6.93 in
No. of Pages: 7
No. of Pieces: 56
Level: Hard

NOTES: The ears and tail are the tricky parts of this model. The ear curl must be glued together and cut out before the ear is constructed. The tail should be made and attached before the main body is closed up. Start at the base of the tail, and build each section before inserting it, with a generous amount of glue, into the previous part. Remember to wait for that section to cure (dry) completely before moving on to the next piece. And as a bonus, we are also including a surprise :o version of Raichu in this pack!

JOLTEON

135 / JOLTEON - Pokémon Papercraft
Name: Jolteon
Type: Electric
Species: Lightning Pokémon
Height: 0.8 m (8′08″)
Weight: 24.5 kg (54.0 lbs.)
Interesting Facts: Jolteon's cells generate a low level of electricity. This power is amplified by the static electricity of its fur, enabling the Pokémon to drop thunderbolts. The bristling fur is made of electrically charged needles. Jolteon is the only Eevee evolution without a tail. Oddly, it can still learn Tail Whip and Iron Tail. It evolves from Eevee via Thunderstone.

THE PAPER MODEL
Height: 18 cm/7 in
Width: 18.9 cm /7.4 in
Depth: 13.3 cm/5.2 in
No. of Pages: 7
No. of Pieces: 74
Level: Hard

NOTES: Follow the numbers on the pieces for the recommended build order. The spikes can become confusing so try to pay close attention to the correct order and use the PDO as guide as much as possible.

SHINX

403 / SHINX - Pokémon Papercraft
Name: Shinx
Type: Electric
Species: Flash Pokémon
Height: 0.3 m (1'08")
Weight: 9.5 kg (20.9 lbs.)
Interesting Facts: Shinx evolves into Luxio starting at level 15, who then evolves into Luxray starting at level 30. Around its forelegs there are a couple of gold ring. These are electricity glands, similar in prurpose as Pikachu's cheeks. When Shinx senses danger, its fur begins to "dazzle", mementarily blinding its foe as it flees.

THE PAPER MODEL
Height: 15.0 cm/5.9 in
Width: 14.7 cm/ 5.8 in
Depth: 17.9 cm/7.0 in
No. of Pages: 4
No. of Pieces: 51
Level: Easy

NOTES: A straight forward build - start at the head and close at one of the hind feet. The only fiddly part is the bottom tufts, and it is advisable that you refer to the PDO for that part.

MINUN

312 / MINUN - Pokémon Papercraft
Name: Minun
Type: Electric
Species: Cheering Pokémon
Height: 0.32 m (1'04")
Weight: 4.2 kg (9.3 lbs.)
Interesting Facts: Minun creates electrical pom-poms from its forepaws and sparks from its body to cheer on its partners. Minun cares more for its teammates than for itself, sending off showers of sparks while cheering them on. At a meeting of Pokémon academics, it was announced that simultaneous exposure to electricity from a Plusle and Minun will promote circulation and boost vitality. If its partner is in trouble, this Pokémon gives off increasing amounts of sparks. Minun's stats are geared towards defense whereas Plusle's stats are sweeper-oriented. It is not known to evolve into or from any other Pokémon.

THE PAPER MODEL
Height: 18.0 cm/7.1 in
Width: 16.6 cm/ 6.5 in
Depth: 8.9 cm/3.5 in
No. of Pages: 4
No. of Pieces: 33
Level: Medium

NOTES: Build by numbers. Pull the long strips of the head across the edge of a table to curl the paper - creating a smoother shape. Close model at one of the feet. Before you use super glue to attach the tail to the body, stand the model up and position the tail so that it acts like a stabilizer.

PLUSLE

311 / PLUSLE - Pokémon Papercraft
Name: Plusle
Type: Electric
Species: Cheering Pokémon
Height: 0.32 m (1'04")
Weight: 4.2 kg (9.3 lbs.)
Interesting Facts: Plusle and Minun bear a remarkable resemblance to their "cousins" Pichu and Pikachu. Plusle creates electrical pom-poms from its forepaws and sparks from its body to cheer on its partners. Plusle is a cheerful and supportive Pokémon, always encouraging comrades in battle by using the spark pouches in its cheeks, it shorts out its body to create the crackling noises of sparks to show its joy. It is very compassionate towards its friends, and is known to cry upon witnessing a friend lose a battle. They are commonly referred to as cheerleaders for these actions. A Plusle may climb telephone poles to absorb electricity. It is not known to evolve into or from any other Pokémon.

THE PAPER MODEL
Height: 18.0 cm/7.1 in
Width: 16.6 cm/ 6.5 in
Depth: 8.9 cm/3.5 in
No. of Pages: 4
No. of Pieces: 33
Level: Medium

NOTES: Build by numbers. Pull the long strips of the head across the edge of a table to curl the paper - creating a smoother shape. Close model at one of the feet. Before you use super glue to attach the tail to the body, stand the model up and position the tail so that it acts like a stabilizer.